14,6 11,2 13 ermet male pm 7 pin rc 3:1 copyright by erni gmbh contact one of the erni companies proprietary notice pursuant to iso 16016 to be obse rved. ermpm class ermet messerl. pm 7 pol rc information: tolerances a3 100100420001 i index www.erni.com before using. version of this drawing, please drawing will not be updated. designation in mm all dimensions scale all rights reserved. only for information. to ensure that this is the latest subject to modification without prior notice. date 1) 0,6 0,05 durchmesser des metallisierten loches 0,6 0,05 diameter of finished plated-through hole schichtaufbau im metallisierten loch siehe zeichnung 114406 / 164062 nr.1 metal plating of planted-through hole see drawing 114406 / 164062 nr.1 10,3 -0,25 6 14,3 0,1 9,7 11,7 2 3 2 15,7 2,25 23,7 22,3 bestckungsplan contact layout a b c d e f g 0,2 21,8 3 lochbild fr leiterplatte a b c d e f g board hole pattern 0,05 6 x 3 = 1) 18 3,5 +0,05 2 3 15 1,5 6 2 4 x 2 = 1,5 1) tray packaging vpe: 36 st. verpackt in tray packaging unit 36 pcs. m 1 : 5 a max. 325 33 max. 138 kontaktbersicht: contacts overview l = lang / long m = mittel / middle s = kurz / short s m l class 1 anforderungsstufe 1 geh?use / housing : pbtp grau 30% gf / pbtp gray 30 %gf kontakte / contacts: phosphor bronze / phosphor bronce oberfl?chenbeschichtung / plating: kontaktbereich / mating area: 2-3 m ni 1,2 m au anschlussbereich / termination : 2-3 m ni 1 m sn matt ma?stab 1 : 1 detail a a b c d e f g m m s s s l l
|
